3D Printed Santa Treat Bowl STL File
What print settings do you recommend?
A good starting point is a 0.12β0.20 mm layer height and 3 or more walls on a 0.4 mm nozzle. Settings vary by printer and filament, so a small test print is always worthwhile.
Do I need supports?
[Choose one and be specific:]
βNo supports are needed when printed as supplied.β
βSupports are recommended under [part]. Tree supports work well.β
Which slicers are compatible?
Any slicer that opens STL files, including Bambu Studio, OrcaSlicer, Cura and PrusaSlicer.
What 3D printer do I need?
The model is designed for [FDM / resin] printers (Bambu Lab, Prusa, Creality, Elegoo, Anycubic and similar). [Confirm what you have tested.]
How big is the printed bowl, and how much does it hold?
At the default size, it measures about [__ mm tall Γ __ mm wide]. [Add capacity.] You can scale it in your slicer, so check your build volume first.
Is it dishwasher safe?
[Fill in only if you have tested it. A safe default is: βHand wash gently with mild soap and cool water. Many common filaments, such as PLA, can warp in hot water or a dishwasher.β]
Can I use the bowl for food?
It is designed to hold treats, but 3D printed plastic is often porous and hard to clean fully. We recommend wrapped treats or a food-safe liner. Direct contact with unwrapped food should only be done if your filament, process and finished surface are certified food safe. When in doubt, use it for display and wrapped sweets.
Are the candies, cookies and background in the images included?
No. The candies, chocolates, cookies, table, rug, plants and furniture in the images are for display only.
Is the model colored?
No. The STL has no color. You choose your colors with different filaments, a multi-color setup or paint.
What exactly do I receive after purchase?
You receive digital STL file(s) for a Santa Treat Bowl. [Add any extra files.] No physical item, candy or treats are shipped.