Karoo Veld HD - Support-Free Desert Terrain STL Set (28-32 Mm, 32 Pieces)
Getting started
Download comes as 12 zip parts (unzip all into one folder).
- Unzip all 12 parts (KarooVeldHD_Part01_of_12.zip ... Part12_of_12.zip) into the same folder. You get KarooVeldHD_FullSet_v1: 35 STL files in folders (Tiles, Hills & Rocks, Walls & Kraal, Buildings, Objectives, Extras), PRINT_GUIDE.pdf (12 pages), README.txt and LICENSE.txt. File numbers KVHD_01 ... KVHD_33 match the contents image.
Printing
- Start with PRINT_GUIDE.pdf.
- Print KVHD_01_Tile_Open_Veld.stl first: 0.4 mm nozzle, 0.2 mm layers, supports OFF, 10-15% infill. Every file is already oriented; just load it and slice.
- Brim: 5 mm on the Fence Line and the 6 in Dry-Stone Wall, 3 mm on the windpump pin, 3-5 mm on the gates.
- Fine parts (sheep flocks, windpump) look best at 0.12-0.16 mm layers or in resin.
- Every piece fits a 220 x 220 mm bed. One of everything = about 111 h and 1.48 kg PLA.
Magnets (optional)
6 x 3 mm neodymium discs (pockets are 6.4 x 3.4 mm). 8 per tile (2 per side); walls and kraal arcs take one in each end. Glue them with alternating polarity (pattern in the guide) and any tile joins any tile in any rotation.
Assembly
- Windpump: glue KVHD_18_Windpump_Pin into the socket under the wheel's gearbox; the pin turns in the tower top.
- Ruin roof / shed roof: drop in place, no glue, lift off to put minis inside.
- Kraal: 4 arcs = round kraal (124 mm); 3 arcs + the Kraal Gate = kraal with a gate.
- Fence: two versions: printed wires, or posts only (string it with real wire or thread).
Licence
Personal licence: print as many copies as you like for yourself, your gaming group and your club. Merchant licence: also sell physical prints, no cap. Sharing, uploading or reselling the files is never allowed. Full text in LICENSE.txt.
Support
Message us through Superhive. Fixes are released as a new version for every buyer.