Circuit Line Generator

Grid Width and Grid Height：

control the area where the traces are generated—for example, 160 and 160 mean the area is 160x160 units.

Chip Size：

The side length of the square space in the middle.

Chip Walkers：

Refers to how many points are emitted from the center. There’s actually an upper limit here: 4 times the Chip Size. For instance, if the Chip Size is 20, the maximum number of points emitted from the center is 20×4=80. Setting it higher than 80 won’t work.

Random Walkers：

The number of randomly scattered points around—these points don’t start in the middle square; they’re randomly distributed and form paths according to the rules.

Max Steps：

The maximum number of steps a point can take. This parameter determines the length of each line。

Initial Straight：

means a point will move straight first, then decide how to turn after the 8th step.

Allow Diagonal：

controls whether diagonal movement is permitted—if unchecked, points will only make right-angle turns.

90-Degree Turn Chance：

The probability of particles making a right-angle turn when "Allow Diagonal" is checked.