Terreno Noir, Procedural Gothic Sci-Fi Terrain, Print Ready for FDM

Eron Lumbre in Presets


# Terreno Noir — Gothic Sci-Fi Terrain Generator for 3D Printing


Generate endless, print-ready wargame terrain in one click. Pointed-arch ruins with

tracery windows, two-storey L-ruins, skirmish walls with working sliding doors,

clustered pillars, platforms, corridors, barricades, props and miniature bases.

Every piece is a single watertight body designed for FDM: no supports, no overhang

steeper than 45°, bridges under 6 mm, 1 mm blunt tips, 0.4 mm elephant-foot chamfer.


## Why it is different

- Seed-based: every click is a new, unique piece. Sell what you print.

- Built-in printability check: non-manifold edges, loose bodies, overhang area.

- Game presets set wall height, door width, cover height and level heights for

  popular 28-32 mm skirmish and battle games (3" walls, 2"/3"/4" levels,

  doors that fit 32 or 40 mm bases, 1" engraved RPG grid).

- Large footprints split automatically with dovetails to fit a 245 mm bed.

- Magnet holes (5x2, 6x2, 6x3 mm) or your own clip cutter.

- One-click STL export, sorted into folders by category.


## What you can generate (41 piece types)

Floors (tech plates, cathedral flagstones, checker, grate, ruined), walls (plain,

buttressed, rose window, gothic railing, bunker, pipe wall), doors (8 styles incl.

working sliding door, iris, portcullis),

windows, corners, ruins, dividers, pillars, corridors (straight, corner, T, cross,

dead end, door module), octagonal hall, platforms, stairs, level supports,

ruin footprints, L-shaped two-storey ruins, barrels, crates, consoles, tanks,

barricades, cogitators, pipes, lamp posts and round bases (25-60 mm).


## Installation

1. Download terreno_noir-1.0.0.zip. Do not unzip it.

2. Drag the zip into Blender 4.5 or newer (or Edit > Preferences > Get Extensions >

   Install from Disk).

3. Open the 3D Viewport sidebar (N) > Terreno Noir tab.


## Quick start

1. Pick a Game preset and click Apply game rules.

2. Pick a Piece, change the Seed, click Generate piece.

3. Click Check printability, then Export STL (by category).

Slice at 0.2 mm layers with 3 perimeters. No supports needed.


## FAQ

**Can I sell the prints?** Yes. The STL files you generate are yours.

**Resin?** Works, but the geometry is tuned for FDM.

**Units?** Millimetres; the add-on sets the scene scale for you.

**Is it affiliated with any game publisher?** No. Presets only use publicly known

measurements; names of games are not used in the add-on.

**License:** GPL-3.0-or-later (code). Renders and docs © Eron Lumbre.


$15

Have questions about this product?
Login to message

Details
Blender Extension Compatible Yes
Published about 2 hours ago
Blender Version 3.0 - 3.5
Extension Type Add-on
Render Engine Used Arnold, Blender-Internal, Cycles, Eevee
License GPL