AV: Offset Cut

AV in Modeling


AV : OFFSET CUT
OFFSET EXISTING EDGES AND FACES — NOT FROM SCRATCH
Tired of rebuilding loops just to shift a contour? AV: Offset Cut lets you offset existing geometry directly in Edit Mode — select an edge chain or a face region, press I, and slide to place the cut with a live preview. Change width, side, construction, and method without destroying your topology or UVs.

LIVE OFFSET PREVIEW IN EDIT MODE

LIVE OFFSET PREVIEW IN EDIT MODE

LIVE OFFSET PREVIEW IN EDIT MODE


    Unlike Blender's native Inset, which builds new geometry inward, AV: Offset Cut works relative to the existing surface. Use Cut to split the original polygons while keeping existing edges, or Inset to build a new strip and reconnect the interior topology. Switch Even for constant perpendicular width, or Directional to move a recognized rounded profile as a rigid shape. UV maps, seams, sharpness, creases, and custom normals are carried through — no unwrapping or repacking required.

KEY FEATURES
CUT & INSET
Split the surface keeping existing edges, or build a new strip with reconnected interior topology.
EVEN & DIRECTIONAL
Constant perpendicular width, or rigid profile-preserving offset for rounded shapes.
INDIVIDUAL INSET
One clean contour per selected face, with automatic safe-width clamping.
SMART ENDPOINTS
Auto, Boundary Rails, Perpendicular Caps, or strict Slide — chosen per end and per side.
INTERACTIVE CONTROLS
Drag for distance, B for both sides, C to swap Cut/Inset, E for Even/Directional, numeric input with units.
GEOMETRIC SNAP
Alt to snap to vertices and edges; Ctrl stepping and Shift precision; live HUD with distance and diagnostics.
UV & ATTRIBUTES
Interpolates all UV maps, preserves seams and pinned corners, inherits edge attributes and custom normals.
SAFE BY DESIGN
Skip unsafe paths or cancel the whole operation; no live mesh changes until you confirm.
WIRE CHAINS
Offset wire edges against a reference plane; both sides supported.
F9 / REDO READY
Tweak exact parameters after applying — no restart needed.
WHO IS IT FOR

Hard-surface modelers, game artists, and anyone who works with clean, controlled edge flow. Perfect for panel lines, inset details, mechanical parts, and asset creation where precise offsets along existing topology matter more than rebuilding from scratch.

REQUIREMENTS
  • ▸ Blender 4.2+ (Extension) or 4.1 (legacy add-on)
  • ▸ Mesh in Edit Mode, no Shape Keys
  • ▸ No external libraries, no network access
SELECT. PRESS I. SLIDE. DONE.
AV : OFFSET CUT — DOCS
CUT · INSET · INDIVIDUAL · EVEN / DIRECTIONAL · UV · HUD
VERSION 1.0.0 · BLENDER 4.1+ · I
AV: Offset Cut is a Blender operator for offsetting existing edges and face regions — Cut or Inset, Even or Directional, with optional Individual Inset. Requires Blender 4.1 or newer.

QUICK START

  1. Select a Mesh, enter Edit Mode. In edge mode (2) select a non-branching edge chain or loop. In face mode (3) select a region whose border should be offset.
  2. Hover a suitable part and press I, or use F3 → AV: Offset Cut, the Edge menu, the context menu, or N → AV: Offset Cut.
  3. Factory defaults: Cut / Even / Auto, distance 0.
  4. Move the mouse along the on-screen arrows: + increases the signed distance, − decreases it. Press B for both sides.
  5. For precision, type a number such as 0.05 or 2cm in scene units.
  6. Confirm with Enter / LMB / Space. Esc / RMB cancels without changing the mesh. After applying, F9 reopens parameters; Ctrl+Z undoes.

"Non-destructive preview" means the mesh is unchanged before confirmation. After confirming it is a normal topology operation, not a modifier.

SUPPORTED SELECTION

  • Individual edges, open chains, and closed loops without branching. Several independent chains may be selected.
  • Face Select uses the border of the selected region; per-face inset is available via Individual Inset. A fully closed selected shell may also enter Individual after pressing I during the operation.
  • Wire edges without faces are supported through Cut. Surface and wire edges cannot be mixed in one connected chain.
  • Multi-object Edit Mode is supported. A shared Mesh datablock is processed once; all objects are prepared before any live mesh is written.
  • Shape Keys are not supported (topology changes). Linked read-only meshes and zero World scale are rejected.

CONTROLS

KEY ACTION
I during operation Individual Inset / return to previous Cut or Inset
C Cut / Inset; exits Individual
E Even / Directional
T Endpoint mode: Auto → Boundary Rails → Perpendicular Caps → Slide → Auto
B Both Sides (not used in Individual)
K Stop at Vertex / Merge & Continue (not in Individual)
N Correct custom shading (recompute custom normals)
U Interpolate UV
S Snap: Off → Vertices → Edges → Vertices & Edges
hold Alt + move Geometric snap to target under cursor
hold Ctrl Round distance to step
hold Shift Precise movement with Controls multiplier
W Pause / resume mouse distance; exits numeric input
R Reset distance and clear numeric input
H Hide / show both HUD blocks
Tab Expand / collapse extra bottom-panel hints
Digits, . / ,, sign, Backspace Numeric input; mouse no longer changes distance
Middle mouse / wheel / NDOF Viewport navigation
Enter / Numpad Enter Apply
Esc / RMB Cancel without changing the mesh

Table reflects factory defaults. Launch shortcut, mouse direction, sensitivity, stepping, and confirmation options are configurable in Add-on Preferences → Controls. These settings do not disable Enter or Esc/RMB.

CUT, INSET & INDIVIDUAL

  • Cut: splits the original polygons and keeps existing edges, including authored triangles. The free corner direction is derived from the original polygon boundary. A non-planar quad is cut by a straight chord; this is not a geodesic offset.
  • Inset: creates a strip along the contour and reconnects the interior topology. Original vertices are not moved; interior triangulation may be reconnected. Switch with C. On a fully wire selection Inset is replaced by Cut automatically.
  • Individual Inset: select faces, launch, press I again. Each selected face gets its own contour, including shared edges. Uses the Inset backend; Both Sides, endpoint policy, and Vertex Contact are not used. Positive inward distance only. Clamp Individual Width reduces the shared request to a safe width before the first collapse or intersection.

EVEN & DIRECTIONAL

METHOD BEHAVIOR
Even Constant perpendicular width on valid supports; the normal choice for most contours. Radius of a rounded contour changes.
Directional Moves a recognized rounded profile as a rigid shape, preserving its form/radius rather than equal width per segment. A full smooth closed loop cannot be rigidly offset inward with radius preserved — use Even or an open profile.

Miter Limit limits the ratio of corner travel to width. Rounding/chamfering is not added automatically. There is no Round, Chamfer, or J/Corners toggle in this version.

OPEN PATH ENDPOINTS

Open Path Endpoints affects only the two ends of an open chain. It does not change intermediate corners, closed contours, Individual, wire, or continuing open borders. Cycle with T.

MODE BEHAVIOR
Auto / Square Caps (default) Picks a suitable slide or the previous automatic cap; no manual switching per end.
Boundary Rails Requires a boundary guide of the support patch; may be found through a coplanar fan.
Perpendicular Caps Free perpendicular cap inside the support without mandatory slide along its edge.
Slide Strictly the adjacent real edge of the selected support face; never falls back to a free cap.

CONTACTS & SAFETY

  • Vertex Contact (K): Stop at Vertex stops the whole operation at the first supported contact with a support vertex; Merge & Continue merges valid intersections and continues across a connected flat support. Not global welding.
  • Extend Open Boundaries: builds a local strip on the missing side of a selected open border. Not extrusion of all object borders; self-folding or self-intersecting strips are rejected.
  • Skip Unsafe Paths keeps valid independent chains and warns. Cancel Entire Operation requires all components to be valid. On a preparation error no live mesh changes; on a write error affected objects are restored.
  • In interactive movement an invalid request may be locally refined to a valid limit. The last valid preview may be kept; applying it warns Applied last valid offset. Press Esc to cancel without applying.

SNAP & UNITS

Alt searches vertices/edges only in editable objects, in a local neighborhood or across all their data per Snap Candidates. Selected source edges and their vertices are excluded. Invisible-through-surface targets are culled unless Snap Through Surfaces is on. Snap changes the distance, not a corner position. Numeric input has priority; in F9 Alt-snap is not performed.

Ctrl is an independent discrete step: Fixed Distance (Ctrl Increment), View Grid Settings (grid_scale_unit / grid_subdivisions, not the adaptive visual grid), or Source Edge Length (fraction of the source edge near the launch cursor).

World honors matrix_world and non-uniform/mirrored scale; unit input honors the scene Unit Scale. Local Mesh uses the mesh's own coordinates.

UV, ATTRIBUTES & TOPOLOGY

  • Interpolate UV is on by default and processes all UV maps per original face. Existing UV breaks and pinned corners are preserved; new points get interpolated UVs. On boundary extension UVs are extrapolated from the support face.
  • Inherit Edge Attributes carries supported edge attributes, seams, sharp/smooth, and crease to corresponding new/reconnected edges. Materials and face data are copied from the support. Not a universal interpolation of arbitrary custom attributes.
  • Custom normals keep original shading directions after topology changes; new corners get interpolated normals. Applies in Cut, Inset, and Individual regardless of UV/attributes. Toggle with N or Correct Custom Shading.
  • Quad-preferred Inset attempts valid convex flat quads but does not guarantee an all-quad mesh. Clean New Microedges dissolves only short new edges outside the result contour — it is not Merge by Distance.

HUD & PREVIEW

The compact HUD shows signed distance, World/Local, construction, method, UV, Snap, Vertex Contact, endpoint type, and brief diagnostics. It follows the mouse or anchors to a corner. The bottom dock is fixed; Tab expands extra hints; H hides both blocks. Show Width Dimension is off by default — the number and dimension line near geometry are not drawn; the Distance value in HUD remains. X-Ray and Preview Depth Bias change only the overlay, not mesh coordinates.

ADD-ON PREFERENCES

Open Edit → Preferences → Add-ons → AV: Offset Cut. Settings are split into sections:

SECTION WHAT YOU CAN CONFIGURE
General Construction, method, UV, units, invalid geometry, boundary fallback, Individual clamp, quad-preferred, cleanup, endpoint mode, vertex contact, tolerance, miter limit, max warp, hidden support, non-manifold sheet, wire plane, edge inheritance, selection, sidebar help
Controls Launch shortcut, mouse direction, sensitivity, Shift precision, Ctrl increment source/step/edge fraction, invert drag, start active, LMB/Space confirm, status-bar help
Snap Geometry snap type, candidates scope, radius, through surfaces, max candidates, screen grid cell
Preview Updates/sec, region fill, secondary edges, X-Ray, depth bias, line width, opacity, source edges, width dimension, mouse direction guide, unsafe highlight, colors
HUD Visibility, scale, follow mouse, anchor, offsets, shortcut dock, bottom margin, precision, flame, shadow, auto-fit, colors
Shortcut Reassign I via the standard Blender shortcut editor

Reset This Section resets the current group. Reset General does not change Preview or Controls; resetting Controls does not restore a customized keymap.

SCRIPTING

The operator must be called in Edit Mode with a suitable selection. F9 and Redo keep the given parameters; only a new interactive invoke uses preferences.

import bpy# Offset 0.05 in World, Cut, Even, UV correction onbpy.ops.av.offset_cut(    prop_plen=0.05,    construction='CUT',    alignment='EVEN',    correct_uv=True,    correct_shading=True)

LIMITATIONS

  • One Mesh in Edit Mode; no Shape Keys. Linked read-only meshes and zero World scale are rejected.
  • No universal geodesic tracing, no global straight-skeleton solver, no guarantee of an all-quad result, and no preservation of the hidden surface of a non-planar n-gon after Cut.
  • A large offset may go beyond the local support. Non-manifold radial fans that are broken or ambiguous are rejected.
  • Known unsupported cases: a closed grid contour through cube corners, a large outward offset on a flattened sphere, Directional on folded fans. These are not working features.

TESTED VERSIONS

Checked on Windows with Blender 5.2. Minimum code version is 4.1. Other OSes require no different code but were not tested separately.

REPORTING ISSUES

When reporting a problem, include:

  • Blender and add-on version
  • OS and a minimal .blend with the selection
  • <

$15

Have questions about this product?
Login to message

Details
Blender Extension Compatible Yes
Published 1 day ago
Blender Version 4.2 - 5.2
Extension Type Add-on
License GPL