Drawer Planner for Gridfinity
No. Drawer Planner makes the bins and the baseplate itself, with the same spec-exact Gridfinity geometry as our Gridfinity Forge (42 mm grid, 7 mm units, stacking lip, 0.5 mm clearance). Use Forge only if you also want single custom bins with dividers or label shelves.
The fields are in mm, but Blender fields take a sum: type 15.75*25.4 and 11.8*25.4. Or model a box of the drawer's inside in any unit and click Measure Selected Drawer; set '1 Blender unit =' to the unit your scene uses.
It becomes a solid filler frame on the baseplate, so the plate fills the drawer edge to edge (minus the side gap). Centred puts it on both sides, Front-left puts it all at the back and right. The panel shows the frame width per side.
Set Bed X / Bed Y to 180. The baseplate is cut into the fewest, most even pieces of whole cells that fit, filler bins are never bigger than the bed, and any bin of yours that is bigger than the bed is flagged in red in the panel.
Not in this version: the packing is automatic and a setting change packs again. You steer it with the item sizes, counts, the filler size and the grid position. The layout sheet shows exactly where each bin goes.
Yes. Select the plan (or any of its bins) and change any setting or item in the panel: the same plan is rebuilt in place. F9, Ctrl+Z, Reset Settings and Remove Plan all work.
STL or 3MF in millimetres: one file per baseplate piece and one per bin size with the count in its name (print 4x), plus a layout sheet (SVG, A4, to scale) and a parts list with sizes and grams.
Discover more products like this
bins gridfinity baseplate storage 3d printing drawer organizer